ホーム > トピックス > Miractran Catalog

Miractran® Catalog (PDF:101KB)

1. Introduction

Miractran® is the trade name for the thermoplastic polyurethane by the Nippon Miractran Co,.Ltd. established in 1965. Moreover Miractran® is sold by the Nippon Polyurethane Industry Co,. Ltd.

This industrial material, Miractran®, is most suited for injection moulding and extrusion moulding. Besides, it can be blow moulded, calendered, and inflation moulded etc.

The resultant product is far superior in physical property to that of the conventional cast type polyurethanes. Miractran® is indeed an outstanding polyurethane elastomer. Our company answers customer’s needs through the TPU business.

to page top

2. Characteristics

Miractran® is one of the best product among thermoplastic elastomers, which has the excellent properties.

  1. Miractran® is specifically featured by its superior Abrasion Resistance.
    It is much superior in abrasion resistance to natural or synthetic rubber and other thermoplastic elastomers.
  2. Remarkable Mechanical Strength.
    Miractran® has far stronger tensile strength than natural or synthetic rubber by double to threefold, it serves the purpose of thinning and decreasing the weight of the final products.
  3. Low Temperature Resistance.
    When placed in low temperature, Miractran® continues to have favorable elasticity and resilience, scarcely showing any change in its hardness.
  4. Resistant capacity to Oil and Gasoline is most favorable.
  5. Resistance to Weathering and to the effect of Ozone is considered most appropriate.
  6. Miractran® can be easily colored by mixing it with coloring agents, as by a mixer.
  7. The Thermoplastic Moulding Process can be put to the same effective use as before.
    Sprews, runners and other elements can be repeatedly utilized.
to page top

3. Applications

Moulding
Field
Applications
Injection
Automotive parts Ball joint, Dust cover, Door locks striker, Steering assembles, Side protection mouldings, antenna jackets, etc.
Machinery parts Gaskets, Packings, O’ring, Caps, Washers, etc.
Foot Wear Ski-boot shells, Soles of workshoes and sportshoes, Motor bike boots, etc.
Others Rollre skate wheels, Caster, Ear-tags, Watch-band, Snow chains, Hammer heads, etc.
Extrusion
Hose,
Tube
High pressure hose, Gardening hose, Irrigation hose, Liner for fire hose, Pneumatic tube, etc.
Film Seat cover, Artiticial leather, Lifejackets, Drain linings, Keyboad covers, etc.
Wire,
Cable
Cable sheathing (car parts),
Cable insulation
Others Rope, Round-belt, V-belt, etc.
Calender
Conveyer belt, Flexible container, Fabric laminates, etc.
Blow
Car parts
Inflation
Various kinds of film (20〜400μ)
Solution
Binder, Adhesives, Artificial leather coatings
to page top

4. Standard Grade

E type

*Above data is not guaranteed but the average from actual result.

  • Testing method :JIS K7311、K6262、K7206
  • Compression Set :70℃×22h
  • Softening Point :Vicat、Weight 9.8N
  • Abrasion Loss :Taber、H-22、weight 9.8N、Rotation frequency 1000
  • Glass Transition Point :DSC
to page top

P type

*Above data is not guaranteed but the average from actual result.

  • Testing method :JIS K7311、K6262、K7206
  • Compression Set :70℃×22h
  • Softening Point :Vicat、Weight 9.8N
  • Abrasion Loss :Taber、H-22、weight 9.8N、Rotation frequency 1000
  • Glass Transition Point :DSC
to page top

5. Dope-coatings

to page top

6. Special Grade

*Above data is not guaranteed but the average from actual result.

  • Testing method :JIS K7311、K6262、K7206
  • Compression Set :70℃×22h
to page top

*Above data is not guaranteed but the average from actual result.

  • Testing method :JIS K7311、K6262、K7206

*here is a product that cannot correspond immediately about special grade.In that case, please feel free to contact us.

to top page

 

  • 新着情報